The curriculum contained in this occupational skills certificate provides a student with the necessary skills to seek entry-level employment as an electronics technician working on digital electronics systems. Students completing this certificate program will have the basic skills needed to work with electronic digital and microprocessor-based equipment. In addition to the ability to use common electronics test equipment, such as oscilloscopes and digital multimeters, students will have an understanding of microcontroller hardware and software and the ability to prototype, test, and debug simple microcontroller-based systems. Students will also have the skills required to design printed circuit boards, solder, and perform basic assembly of electronic systems.

An Occupational Skills Certificate is awarded upon completion of all required courses with a grade of C or better.

Program Outcomes

- Communicate technical information, assess data, analyze information, and write professional reports.

- Synthesize, debug and analyze microcontroller-based programs.

- Prototype, build, and test basic digital circuits.

- Use common tools in the trade to troubleshoot, analyze, and repair electronic equipment.

This program provides a comprehensive introduction to solar photovoltaic (PV) energy systems, including system sizing, design and installation. Basic electrical theories and National Electrical Code related to photovoltaics will be studied. Hands-on experiments and laboratory assignments with state-of-the-art test instruments will provide testing and troubleshooting techniques. Successful participants will also be qualified to sit for the North American Board of Certified Energy Practitioners (NABCEP) “PV Installer Entry Level Certificate of Knowledge” examination.

Employment opportunities may include positions such as photovoltaic installer, inspector, electrical assistant, electrical technician, maintenance technician, public utilities and sales representative, engineering technician along with purchasing and project administrator.

A Certificate of Achievement is awarded upon completion of all required courses with a grade of C or better.

Program Outcomes

- Explain residential and commercial photovoltaic system terminology and installation techniques both verbally and in writing.

- Demonstrate an apprentice-level installation of a residential rooftop photovoltaic system.

- Demonstrate knowledge and skills required to install basic ground and pole mount photovoltaic systems.

- Differentiate and apply the proper selection of materials, tools, and test equipment for residential photovoltaic system installation and repairs.

- Demonstrate the use of the Sun pathfinder calculator for shading analysis.

The Electrical Technology program provides leading-edge technical training that will prepare students for career opportunities in the electrical industry.

The curriculum offers technical training to acquire knowledge and skills related to the design and installation of electrical equipment, materials, devices, and lighting fixtures for the Building Construction Program. Hands-on laboratory experiments will offer the necessary experience for the safe use and operation of electrical hand and power tools. Technical training includes National Electrical Codes and standards. The program offers basic concepts and principles of electricity, machinery, and programming programmable logic controllers. Students will be instructed with state-of-the-art technology tests and measurement instruments.

Employment opportunities may include positions such as electrical assistant, electrical technician, maintenance technician, public utilities and sales representative, and engineering technician along with purchasing and project administrator.

A Certificate of Achievement is awarded upon completion of all required courses with a grade of C or better.

Program Outcomes

- Describe principles of Direct and Alternating current, Ohm’s law, and current/voltage/power laws both verbally and in writing. - Demonstrate an installation of a residential branch circuit for a three-way switch.

- Differentiate and apply the proper selection of materials, tools, and test equipment for residential and commercial electrical installation and repairs.

- Demonstrate knowledge and skills required to perform basic apprentice-level electrician duties required by the National Electrical Code (NEC) for residential wiring.

The curriculum prepares students to transfer to a 4-year Interior Design program or seek employment in the interior design industry as entry-level designers. Emphasis is on a solid foundation in the area of Interior Design. Students will develop a portfolio.

An Occupational Skills Certificate is awarded upon completion of all required courses with a grade of C or better.

Program Outcomes

- Demonstrate command of the vocabulary of the interior design field and an understanding of the components of interior design.

- Create original design projects that analyze, define, and solve problems in interior design, including space planning, materials and furnishings, design communication, and visualization.

- Utilize the critique process to analyze design solutions and the effectiveness of the visual communication of projects.

- Create and present a portfolio of original student work that represents the necessary skills and an understanding of the principles and elements of design relative to the profession of interior design.

The curriculum prepares students with some prior design background to seek entry-level employment/internship in the industrial design professions, which encompass product, transportation, environmental, and entertainment design. Students also use portfolios for transfer applications to four-year and graduate institutions. Innovation and the creative design process are the focus of the program. Completion of the program results in a portfolio of projects.

An Occupational Skills Certificate is awarded upon completion of all required courses with a grade of C or better.

Program Outcomes

- Understand the fundamental purpose of the industrial design profession and its integral role in the business world.

- Create hands-on projects that demonstrate basic design processes which include problem definition, research, concept development and refinement, and final presentation.

- Perform appropriate technical skills using professional tools, materials, and processes for application to design projects and presentations.

- Analyze, evaluate and improve designs through the critique process.

The Associate in Science degree and Certificate of Achievement in Welding Gas and Electric is a full-time program designed for individuals seeking entry-level positions in the field. Students enrolling in this program should be able to commit to full-time student status, which is approximately 21 hours per week. This time commitment is necessary to allow for hands-on training with the lab applications used during the course of instruction.

LATTC’s welding program is a Certified Welding Test Center. Individuals seeking certification as welder can take the required certification exams on-site. By fulfilling the program requirements, students will have the necessary skills for all positions that are related to welding on plates. This program prepares the student for fabrication work, construction work, job shops, and other entry-to-mid level related jobs.

Program Learning Outcomes (PLOs)

Upon completion of the Degree/Certificate program, students are able to:

- Name and select the appropriate hand and power tools in order to set up a portable oxyacetylene welding outfit and a 1” Vee Groove test Plate.

- Use welding equipment and jigs to set up and weld a Vee Groove in a vertical position using AWS Standards and safe procedures.

- Apply the proper procedures for calculation and measurements by sketching oblique, isometric, and pictorial views to designated sizes

Projected retirements of existing operators and expansion of the industry will fuel the demand for occupations in Supply Water Distribution. The net result of these shifts will be increased openings for personnel in all areas: plant operations, distribution/collection field maintenance, administration, customer service, line supervision, meter readers, engineers, and plant maintenance.

The Water Systems Technology program at LATTC offers students a choice of two concentrations within the water systems industry:

- WASTEWATER OPTION offers courses focusing on preliminary, primary, secondary, and tertiary treatment systems as well as disinfection methods, solids treatment, and solids and effluent disposal practices.

- SUPPLY WATER OPTION offers courses focused on the operation and design of water systems, wells, pumps, and meters; water treatment for potable water; and technical phases of automatic controls, including power and code considerations

Program Learning Outcomes (PLOs)

Upon completion of the Degree program, students are able to:

- Discuss Regulations governing wastewater treatment and the organizations involved.

- Describe the supply water treatment processes and process control strategies.

- Use advanced mathematical operations to solve applied wastewater calculations and measurements.

The Street Maintenance Technology program is designed primarily for those involved in public works maintenance operations. Asphaltic and concrete pavement, construction, plan reading, calculation of materials, state and municipal codes, report writing, and heavy equipment operation and maintenance are some of the skills required in this field. To meet the training needs of persons interested in becoming street maintenance workers, LATTC offers a Street Maintenance Associate degree and a Certificate of Achievement.

The street maintenance field has evolved into a broader category of workers. Workers in this arena are primarily employed by governmental agencies that perform maintenance operations on public highways and streets. Professionals in this field are involved at the ground level through upper-level management.

By fulfilling the program requirements, students will have the necessary knowledge and skills for a career as Street Services workers. Knowledge and skills will be mastered in the area of installation and maintenance of various types of street construction and material including asphalt and concrete. Students will also gain the supervisory skills needed to be promoted into management.

Program Learning Outcomes (PLOs)

Upon completion of the Degree/Certificate program, students are able to:

- Perform street services works utilizing hand and power tools.

- Perform calculations and measurements required for street services work in accordance to industry standards.

- Demonstrate various soft skills, such as the ability to work independently and interdependently to safely accomplish shared professional outcomes, needed for employment in the street maintenance technology industry.

The program is designed for any interested individuals seeking to learn the most updated information on recycling and solid waste management. The program addresses environmental, technological, political, legal, planning, and economic aspects of recycling and solid waste management policies.

By fulfilling the program requirements, students are prepared and advanced in the Solid Waste Management industry to work as Solid Waste Operators, Solid Waste Technicians, Solid Waste Supervisors, Hazardous Waste Operators, or Environmental Specialists. Students completing the Certificate Program will be proficient in performing the duties involved in landfill management including collection, transportation, storage, and disposal.

Program Learning Outcomes (PLOs)

Upon completion of the Certificate program, students are able to:

- Identify and discuss the sources of solid waste and its treatment technology.

- Describe the solid waste stream and the treatment processes and process control strategies.

- Use basic mathematical operations to solve entry level solid waste calculations and measurements.

LATTC offers a series of courses for individuals interested in working in the new, emerging renewable energy and energy efficiency industry. This degree program includes courses that enable individuals to: (1) have the requisite knowledge and skills to obtain employment in the energy/utility sector and (2) obtain skills and expertise to pursue other renewable energy and/or energy efficiency occupations.

A Certificate of Achievement in Weatherization and Energy Efficiency may be earned by completing 12 units of Required Courses.

LATTC offers a series of courses for individuals interested in employment as weatherization and energy efficiency specialists. The courses are developed both for new building professionals and for professional builders/contractors already in the workforce in need of these skills. Homeowners may also find the introduction class helpful. Individuals will be prepared to be weatherization, energy efficiency, and retrofit technicians, home improvement retrofit trainees, residential air sealing technicians, insulation installers, energy conservation representatives, or residential energy field auditors.

PROGRAM LEARNING OUTCOMES (PLOs)

Upon completion of the Certificate program, students are able to:

- Perform new and retrofit weatherization and related energy efficiency operations using hand and power tools, testing equipment, and other P.P.E. in accordance with industry standards.

- Evaluate site and remediation strategies through building orientation, erosion, and water management.